What it approves
Modified airplane, widening fuselage and increasing gross weight.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This certificate issued to: Juniper, Inc.
4801 East 147 th Avenue Anchorage, AK 99516
Part 3 of the Civil Air Regulations dated November 1, 1949.
Original Product - Type Certificate Number : 1A2 Make : Piper Model : PA-18
Modified airplane per B.A.R.F., Inc. Drawing List stamped “FAA Approved” on May 21, 1980, or later.
Airplane Flight Manual Supplement No. 2 dated May 21, 1980, required.
This approval should not be extended to other specific airplanes of this model on which other previously approved modifications are incorporated, unless it is determined that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effect upon the airworthiness of that airplane. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date reissued : April 22, 2008; May 28, 2008
Original signed by Todd Dixon
( Signature) Todd G. Dixon Associate ACO Manager, Electrical Systems & Avionics Wichita Aircraft Certification Office (Title) Date of application : September 2, 1977 Date of issuance : May 21, 1980
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| The New Piper Aircraft Inc. | PA-18 Series | 1A2 |
Every issue · 2
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| May 28, 2008 | Reissued, current | Certificate |
| April 22, 2008 | Reissued, earlier issue | Certificate |