STC SA1591NM

This Certificate issued to PARA~NAUTICS, LLC 2850 Bronzino Court Henderson, NV 89052-3181 Part 3* of the Civil Air Regulations.

*Certification basis is set forth in Type Certificate Data Sheet A4CE Original Product Type Certificate Number :

A4CE Cessna U206,U206A,U206B,U206C,U206D,U206E,U206F, U206G,TU206A,TU206B,TU206C,TU206D,TU206E, TU206F,TU206G (Landplanes) Description of Type Design Change Installation of inflight roll-up door and external assist handles when fabricated and installed in accordance with T & J Leasing, Inc. Drawings TJL 100-1, TJL 100-2 and Manufacturing and Installation Instructions TJL-I206 dated February 1, 1984 or later FAA Approved revision, or in accordance with PARA~NAUTICS, LLC Master Document List # PNL-03NAG, Revision 1, dated February 20, 2015 or later FAA Approved revision.

1. The installation should not be incorporated in any aircraft unless it is determined that the interrelationship between this installation and any previously approved configuration will not introduce any adverse effect upon the airworthiness of the aircraft. The approval of this modification applies to the above noted aircraft models only. A copy of this STC must be included in the permanent records of the modified aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

2. See (Continuation Sheet) page 3 of 3 pages for additional limitations and conditions.

Date of application : January 26, 1984

Date of issuance : June 27, 1984

Date reissued : November 4, 2011;

February 26, 2015

Date amended : February 26, 2015

__ (Signature) Manager, Airframe Branch Los Angeles Aircraft Certification Office

Transfer the ownership of the Supplemental Type Certificate Number to (Name of transferee) (Address of transfer) (Number and street)

(City, State, and Zip code) from (Name of grantor) (Print or type) (Address of grantor) (Number and street)

(City, State, and Zip code) Extent of Authority (if licensing agreement):

Signature of grantor (In ink):

3. Installation of the following skydiving kit items are required: Cessna U206 or TU206 Skydiving Kit Spoiler (as applicable), wing flap circuit interrupt switch depressor plate, and airspeed limitation placard.

4. FAA Approved Supplemental Flight Manual dated June 27, 1984 or later approved revision is required.

5. FAA Approved Supplemental Airplane Flight Manual document number FJD-ASFM-001 dated October 15, 2014 or later FAA Approved revision is required for Cessna airplane models U206, U206A through U206G and TU206A through TU206G, except serial numbers U20602589 and U20604650 through U20606439, landplanes only.

6. FAA Approved Airplane Flight Manual Supplement document FJD-AFMS-001 dated October 15, 2014 or later FAA Approved revision is required for Cessna airplane models U206G and TU206G, serial numbers U20602589 and U20604650 through U20606439, landplanes only.

END