What it approves
Installation of a spacer block assembly on helicopters equipped with high skid gear
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
N umber SA1609SO This certificate issued to
Part 6 of the Civil Air R egulations .
Original Product -- Type Certificate N umber :
Installation of a spacer block assembly on helicopters equipped with high skid gear in accordance with Aeronautical Accessories Drawing Number AA206-031-586, Revision “B”, dated April 15, 1984, and Spacer Assembly Installation Instructions dated April 9, 1984, or later FAA approved revision.
The approval of this change applies basically to Bell Models 206A and 206B. The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission. This determination should include consideration of significant changes in weight distribution such as an increase in the fixed disposable weight in the fuselage.
Bell Helicopter Textron, Inc.
441 Industrial Park Road Piney Flats, TN 37686 H2SW M ake : Bell Helicopter Textron Canada Limited M odel : 206A and 206B Date of application : March 22, 1984
Date of issuance : May 22, 1984
Date reissued : May 29, 2013
B y direction of the A dministrator
(Signature) Scott A. Horn, Acting Manager, Rotorcraft Certification Office, Southwest Region
FAA Form 8110-2-1(10-69) Page 2 of 2
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.