What it approves
Install wing front spar reinforcement kit.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This certificate issued to: Dynamic Aviation Group, Inc.
1402 Airport Rd, PO Box 7 Bridgewater, VA 22812
Part 23 of the Federal Aviation Regulations, effective February 1, 1965, as amended in the Type Certificate Data Sheet.
Original Product - Type Certificate Number : A31CE Make : Beech Model : F90
Install wing front spar reinforcement kit per Aviadesign, Inc. Master Drawing List E.O.-B-8002 with an FAA Approved date of December 4, 1981, or later.
1) This approval should not be extended to other specific airplanes of this model on which other previously approved modifications are incorporated, unless it is determined that the interrelationship between this change and any of these other previously approved modifications will introduce no adverse effect upon the airworthiness of that airplane.
2) If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date reissued : February 20, 2008
Date amended : May 15, 1985
Original signed by Todd Dixon
( Signature) Todd G. Dixon Associate ACO Manager, Electrical Systems & Avionics Wichita Aircraft Certification Office (Title) Date of application : November 17, 1981 Date of issuance : December 4, 1981
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Raytheon Aircraft Company | F90 | A31CE |