STC SA1733CE

FAA Form 8110-2 (5/14) Page 1 of

Part of the

Signature

Title effective February 1, 1965, plus the amendments and special conditions listed in the type certificate data sheet.

SA1733CE Textron Aviation Inc.

One Cessna Boulevard Wichita, KS 67215 21&25 Federal Aviation Regulations Cessna 550, S550 and 560 3 A22CE For Cessna Model 550 installations made prior to November 30, 1992, according to the Dual Camera Installation per Avcon Division Drawing List No. 7010, dated May 5, 1986, and stamped "FAA Approved" May 7, 1986, or later; and FAA Approved Avcon Airplane Flight Manual Supplement with a date of January 19, 1983, or later FAA Approved revision.

1. This approval should not be extended to other specific airplanes of this model on which other previously approved modifications are incorporated, unless it is determined that the interrelationship between this change and any of these other previously approved modifications will introduce no adverse effect upon the airworthiness of that airplane.

2. Approval of this STC is not authority to produce parts.

(see continuation sheet 3 of 3) June 4, 1982; January 4, 1985; March 3, 1986;

April 27, 2017 February 11, 1983; May 7, 1986;

November 30, 1992; December 22, 1992 January 19, 1982 May 4, 1982 Mark Fuller STC ODA administrator ODA-100129-CE

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee)

From (Name and address of grantor)

FAA Form 8110-2 (5/14) Page 3 of

Date of Issuance: May 4, 1982 Date Amended: December 22, 1992 Date Reissued: April 27, 2017

Description of Type Design Change (continued):

For Cessna Model 550 installations made after November 30, 1992, according to the Dual Camera Installation per Avcon Industries, Inc., Drawing 7011, Provisions Installation Cessna 550 and S550, dated April 10, 1986, or later FAA Approved revision;

Installation Number 7011 (no dash) stamped "FAA Approved" on November 30, 1992, or later; and FAA Approved Avcon Airplane Flight Manual Supplement with a date of January 19, 1983, or later FAA Approved revision (SN 550-0001 thru SN 550-0626) or FAA Approved Cessna Airplane Flight Manual, Supplement 32, STC SA1733CE, Installation Single or Dual Camera, dated November 30, 1992, or later FAA Approved revision (S/N 550-0627 and on).

For Cessna Model S550 installations made prior to November 30, 1992, according to the Dual Camera Installation per Avcon Division, Drawing List Number 7010 dated May 5, 1986, and stamped "FAA Approved" May 7, 1986, or later ; and FAA Approved Avcon Airplane Flight Manual Supplement dated January 19, 1983, or later FAA Approved revision.

For Cessna Model S550 installation made after November 30, 1992, according to the Avcon Industries, Inc. Drawing 7011, Provisions Installation Cessna 550 and S550, dated April 10, 1986, or later FAA approved revision; Installation Number 7011-103 stamped "FAA Approved" on November 30, 1992, or later; and FAA Approved Avcon Airplane Flight Manual Supplement dated January 19, 1983, or later FAA Approved revision.

For Cessna Model 560 installations, made according to Dual Camera Installation per Avcon Industries, Inc. Drawing 7011, Provisions Installation Cessna 550 and S550, dated April 10, 1986, with changes dated December 10, 1992, Installation Number 7011-105 stamped "FAA Approved" on December 22, 1992, or later FAA Approved revision; and FAA Approved Cessna Airplane Flight Manual, Supplement 37, STC SA1733CE Installation Dual Camera, with a FAA approval date of December 8, 1992, or later.

3. With this STC installed the airplane must be operated in restricted category.

4. Conversion from transport category to restricted category and from restricted category to transport category is accomplished by the following documentation. For the Cessna Model S550 it is Avcon Manual AI107-85 "Instruction Manual Camera Pod and Plug Installation Model S550." For the Cessna Model 550 it is Avcon Manual AI103-82-550B "Instruction Manual Camera Pod and Plug Installation Cessna Model 550." For the Cessna Model 560 it is Cessna Supplement to Model 560 Maintenance Manual STC SA1733CE-56MM00.

5. For installations in Cessna Model 560 airplanes the maximum altitude is limited to 43000 feet.

-- END -- 3 SA1733CE