What it approves
Installation of extended width cabin door.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2 (5/14) Page 1 of 2
Reissued on July 31, 2017 to supersede the original STC, which has been lost or misplaced.
Number: SA174RM
Part 25 of the Federal Aviation Regulations.
Original Product – Type Certificate Number: A22CE Make: Cessna Model: 500, 550, 560
Installation of Extended Width Cabin Door in accordance with Branson Aircraft Corporation list of drawings and documents, Extended Door, Number 91500, dated April 26, 1979, FAA approved April 30, 1979, or later FAA approved revision.
1. This approval should not be extended to other aircraft of this model on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any other previously approved modification will introduce no adverse effect upon the airworthines s of that aircraft.
2. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of Application: April 30, 1979 Date Reissued: 11/15/82; 9/14/83; 12/24/97; 7/21/05; 7/31/17 Date of Issuance: May 04, 1979 Date Amended: December 12, 1991
Signature
Title Jim Grigg Manager, Fort Worth A CO Branch, Compliance & Airworthiness Division Sierra Industries, Ltd.
122 Howard Langford Drive Uvalde, TX 78801
FAA Form 8110-2 (5/14) Page 2 of 2
Transfer the ownership of Supplemental Type Certificate Number: SA174RM
To (Name and address of transferee)
From (Name and address of grantor)
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SA18NW
FAA Form 8110-2 (5/14) Page 3 of 3
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.