What it approves
Installation of KAP 100 single axis, KAP 150 two axis, or KFC 150 two axis flight control system and optional KAS 297B vertical speed and altitude selector.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Page 1 of 3 FAA Form 8110-2 (5/14)
Number: SA1770CE-D This certificate issued to: Honeywell International Inc.
21111N 19th Ave Phoenix, Arizona 85027 Part 3 of the Civil Air REgulations Original Product – Type Certificate Number: Make: Cessna Model:
3A13 182P, 182Q, 182R, T182
Install KAP100 single axis, KAP150 two axis, or KFC150 two axis Flight Control System and optional KAS297BVertical Speed and Altitude Selector.
(See continuation Sheet for Required Data)
This approval should not be extended to other specific airplanesof this model on which other previously approved modificationsare incorporated, unlessit isdetermined that the interrelationship between this change any any of those other previously approved modificationswill introduce no adverse effect upon the airworthinessof that airplane.
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of Application: 12-9-82 Date Reissued: 2-28-95, 2-28-00, 3-21-20
Date of Issuance: 2-14-83 Date Amended:
6-6-83; 3-29-85
Signature
Title Richard B. Sleigh ODA Administrator, ODA-602216-NM
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Page 2 of 3 FAA Form 8110-2 (5/14)
To (Name and address of transferee)
From (Name and address of grantor)
FAA Form 8110-2 (5/14) Page 3 of 3
(Continuation Sheet) Number: SA1770CE-D
REQUIRED DATA:
Models 182Pand 182Q (s/n 18260826thru 18266590) KAP100 Single Axis Flight Control System
1. Master Drawing List 155-9277-00, Rev. 2, dated 6-2-83.
2. Supplemental Airplane Flight Manual 006-0422-00, dated 6-6-83.
KAP150 and KFC150 Two Axis Flight Control System
1. Master Drawing List 155-9277-00, Rev. 2, dated 6-2-83.
2. Supplemental Airplane Flight Manual 006-0422-01, dated 6-6-83.
Optional KAS297BVertical Speed and Altitude Selector
1. Master Drawing List 155-9277-00, Rev. 3, dated 3-29-85.
2. Supplemental Airplane Flight Manual 006-0422-02, dated 3-29-85.
Models 182Q, 182R, T182 (s/n 18266591and after KAP100 Single Axis Flight Control System
1. Master Drawing List 155-9277-00, dated 1-10-83.
2. Airplane Flight Manual Supplement 006-0418-00, dated 2-14-83.
KAP150 and KFC150 Two Axis Flight Control System
1. Master Drawing List 155-9277-00, dated 1-10-83.
2. Airplane Flight Manual Supplement 006-0418-01, dated 2-14-83.
Optional KAS297BVertical Speed and Altitude Selector
1. Master Drawing List 155-9277-00, Rev. 3, dated 3-29-85.
2. Airplane Flight Manual Supplement 006-0418-02, dated 3-29-85.
Later FAA approved revisionsto above listed data are incorporated without further revision to the Supplemental Type Certificate.
------------------------------------------------------------------------------------END--------------------------------------------------------------------------------
ADs that name this STC · 1
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 4
Every issue · 2
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| March 21, 2020 | Reissued, current | Certificate |
| February 28, 2000 | Reissued, earlier issue | Certificate |