What it approves
Install KAP 150 two axis or KFC 150 two axis Flight Control system
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Page 1 of 2 FAA Form 8110-2 (5/14)
Number: SA1772CE-D This certificate issued to: Honeywell International Inc.
21111N 19th Ave Phoenix, Arizona 85027 Part 3 of the Civil Air Regulations.
Original Product – Type Certificate Number: Make: Cessna Model:
3A12 172I
Install KAP150 two axis or KFC150 two axis Flight Control System.
REQUIRED DATA: King Master Drawing List titled “Master Drawing List for Cessna Model 172I, s/n 17256631” Rev. N/C, dated 4-8-83 or later FAA approved revisions.
The approval of this change in type design applies only to airplane Serial Number 17256631.
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of Application: 4-8-83 Date Reissued: 2-28-95, 2-28-00, 3-21-20
Date of Issuance: 4-20-83 Date Amended:
Signature
Title Richard B. Sleigh ODA Administrator, ODA-602216-NM
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Page 2 of 2 FAA Form 8110-2 (5/14)
To (Name and address of transferee)
From (Name and address of grantor)
ADs that name this STC · 1
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Textron Aviation Inc. | 172I | 3A12 |
Every issue · 2
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| March 21, 2020 | Reissued, current | Certificate |
| February 28, 2000 | Reissued, earlier issue | Certificate |