STC SA1832WE

This Certificate issued to Southwestern Aero Exchange, Inc.

18502 East 108th Street North Owasso, OK 74055-8124 Part CAR 3 of the Civil Air Regulations.

A-765 Beech D18C, D18S, E18S, E18S-9700, C-45G, TC-45H, TC-45G, C-45H, TC-45J (SNB-5), JRB-6 Description of Type Design Change: The installation of Volpar Tricycle Landing Gear in accordance with FAA Sealed Drawing List 883.

Limitations and Conditions: If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission. The approval of this change in type design applies basically to the above models only. This approval should not be extended to other specific airplanes of these models on which other previously approved modifications are incorporated unless it is determined that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effect upon the airworthiness of that airplane.

This certificate and the supporting data, which is the basis for approval, shall remain in effect until surrendered, suspended, revoked or a termination date is otherwise established by the Administrator of the Federal Aviation Administration.

Date of application: November 5, 1968

Date of issuance: December 11, 1968

Date reissued: Dec. 10, 1997; May 1, 2006

Date amended: October 26, 1973

( Signature)

Manager, Technical & Administrative Support Staff, Los Angeles Aircraft Certification Office ( Title)