What it approves
Installation of a flight attendant seat at RH floor level exit door.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This Certificate issued to United Air Lines, Inc.
600 Jefferson Street Houston, Texas 77002
Part 4b of the Civil Air RlOriginal Product Type Certificate Number :
4A25
Boeing
DC-8-71, -61 Description of Type Design Change: To meet the requirements of the 14 CFR § 25.785(h), a new flight attendant seat will be installed at RH floor level exit door. This seat installation will be done according to United Air Lines, DAS-1-WE, Approved Drawing List # 1926 dated February 17, 1983, or later FAA approved revisions.
Limitations and Conditions: This approval should not be extended to other specific airplanes of this model on which other previously approve d modifications are incorporated, unless it is determined that the interrelationship between th is change and any of those other previously approved modifications will introduce no adverse e ffect upon the airworthine ss of that airplane.
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
This certificate and the supporting data, which is the basis for approval, shall remain in effect until surrendered, suspended, revoked or a termination date is otherwise established by the Administrator of the Federal Aviation Administration.
Date of application: November 8, 1982
Date of issuance: February 11, 1983
Date reissued: November 30, 2011
( Signature) Haifa Haj-Eid Supervisor, Technical & Administrative Support Staff, Los Angeles Aircraft Certification Office ( Title)
NOTE:
DO NOT DELETE THIS PAGE.
DO NOT ADD ANY DATA TO THIS PAGE.
THIS PAGE IS FOR PAGE NUMBERING PURPOSES, PLEASE DISCARD PRINTED COPY.
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.