What it approves
Revise passenger seating configuration from 125Y to dual class, 8F/101Y total 109 passenger seats in accordance with United Air Lines, DAS-1-WE, Approved Drawing List No. 1934 dated October 27, 1985, or later FAA approved revisions.Approved for models 737-222, 737-291, and 737-2A1.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This Certificate issued to United Air Lines, Inc.
600 Jefferson Street Houston, Texas 77002
Part 25 of the Federal Aviation RlOriginal Product Type Certificate Number :
A16WE
Boeing
737-222, -291 and 2A1 Description of Type Design Change: Revise passenger seating configuration from 125Y to dual class, 8F/101Y total 109 passenger seats in accordance with United Air Lines, DAS-1-WE, Approved Drawing List No. 1934 dated October 27, 1985, or later FAA approved revisions.
Limitations and Conditions: This approval should not be extended to other specific airplanes of this model on which other previously appr oved modifications are incorporated unless it is determined that the interrelationship between this cha nge and any of those other previ ously approved modifications will introduce no adverse effect upon the airworthiness of that airplane. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
This certificate and the supporting data, which is the basis for approval, shall remain in effect until surrendered, suspended, revoked or a termination date is otherwise established by the Administrator of the Federal Aviation Administration.
Date of application: February 22, 1983
Date of issuance: March 23, 1983
Date reissued: November 30, 2011
Date amended: September 29, 1985
( Signature) Haifa Haj-Eid Supervisor, Technical & Administrative Support Staff, Los Angeles Aircraft Certification Office (Ti l )
NOTE:
DO NOT DELETE THIS PAGE.
DO NOT ADD ANY DATA TO THIS PAGE.
THIS PAGE IS FOR PAGE NUMBERING PURPOSES, PLEASE DISCARD PRINTED COPY.
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| The Boeing Company | 737-200 Series | A16WE |