STC SA1973AT-D

Supplemental type certificate · TruAtlantic Mfg., LLC

Holder
TruAtlantic Mfg., LLC · United States
Status
Current · Reissued
Status date
June 12, 2014
Applied
July 8, 1999
Product
Aircraft · Small Airplane
Certification basis
Part 21, Part 23
Data sheet
TCDSA37CE

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Installation of a Composite Support Flange for the Inertial Separator Duct

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Possession of this Su pplemental Type Certificate (STC) document by persons other than the STC holder does not constitute rights to the design data nor to alter an aircraft, aircraft engine, or propeller. The STC’s supporting documentation (drawings, instructions, specifications, flight manual supplements, etc.) is the property of the ST C holder.

FAA Form 8110-2 (5/14) Page 1 of 3

Number: SA1973AT-D

This certificate issued to: TruAtlantic Mfg., LLC 1322 South Park Drive Kernersville, NC 27284

Part 23 of the Federal Aviation Regulations.

Original Product – Type Certificate Number: Make: Cessna A37CE Model: 208, 208A, 208B

Installation of a Composite Support Flange for the Inertial Separator Duct in accordance with Atlantic Aero, Inc. Master Drawing List 16393001, Rev. Basic, dated December 15, 1999, or later FAA Approved revision.

This approval should not be extended to other aircraft of this model on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications will produce no adverse effect upon the airworthiness of that airplane. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission. (See Page 2 Continuation)

Date of Application: July 8, 1999 Date Reissued: June 12, 2014 Date of Issuance: January 12, 2000 Date Amended:

Signature

Title Melvin D. Taylor, Manager Atlanta Aircraft Certification Office

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate This certificate may be transferred or made available to third persons by licensing agreements in accordance with 14 CFR 21. 47.

FAA Form 8110-2 (5/14) Page 2 of 3

To (Name and address of transferee)

From (Name and address of grantor)

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SA1973AT-D

This certificate may be transferred or made available to third persons by licensing agreements in accordance with 14 CFR 21. 47.

FAA Form 8110-2 (5/14) Page 3 of 3

Date of Reissuance: June 12, 2014

Limitations and Conditions (Continued)

The following Document is a required part of this STC:

a. Atlantic Aero Document 16393010, Instructions for Continued Airworthiness, Rev. NR, dated December 15, 1999 or later FAA approved revision.

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 2

MakeModelData sheet
Cessna Aircraft Company208A37CE
Cessna Aircraft Company208BA37CE