STC SA2045CE

Number SA2045CE

This certificate issued to: Petersen Aviation, Inc.

Route 1, P.O. Box 18 Minden, NE 68959

Part 3 of the Civil Air Regulations.

Original Product - Type Certificate Number : A-777 Make : Beech Model : 35, A35, B35, C35, D35, E35, F35, G35 and 35R Description of Type Design Change:

Operation of airplane on unleaded automotive gasoline, 87 minimum antiknock index and leaded automotive gasoline, 88 minimum antiknock index (RON + MON)/2 per ASTM Specification D-439. Intermixing with aviation gasoline also approved. Data Required: (1) Petersen Drawing U674904 dated August 10, 1984, revised November 9, 1984, or later “FAA Approved” revision; and (2) Airplane Flight Manual Supplement dated September 25, 1984, revised November 9, 1984, or later “FAA Approved” revision.

Limited to those airplanes equipped with TCM E-185-( ), E-225-( ) and I0-470-J or K series engines certificated (original or STC) or FAA Field Approved engine installations, modified in accordance with STC SE2016CE, SE2033CE or SE2034CE. This approval should not be extended to other specific airplanes of these models on which other previously approved modifications are incorporated, unless it is determined that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effect upon the airworthiness of that airplane. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application : May 25, 1984 Date of issuance : December 7, 1984

Date amended : May 10, 2004

Original signed by

(Signature) Joel M. Ligon Program Manager Wichita Aircraft Certification Office (Title)