STC SA2069CE-D

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate The STC’s supporting documentation (drawings, instructions, specifications, flight manual supplements, etc.) is the property oft h eS T C holder.

FAA Form 8110-2 (5/14) Page 1 of This certificate issued to:

Part of the

Signature

Title 3 SA2069CE-D 23 Honeywell International Inc.

21111 N 19th Ave Phoenix Arizona 85027 Federal Aviation Regulations Richard B. Sleigh ODA Administrator, ODA-602216-NM Install KAP-150 three axis or KFC-150 three axis Flight Control System with optional KAS-297B Vertical Speed and Altitude Selector.

(See continuation sheet) This approval only applies to Lake Model 250 Serial Number 36 and after. This approval included an evaluation of these installations in addition to alterations approved by Supplemental Type Certificate Numbers SA264NE and SA469NE. This approval should not be extended to other specific airplanes of this model on which other previously approved modifications are incorporated, unless it is determined that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effect upon the airworthiness of that airplane.

(See continuation sheet) Consolidated Aeronautics Lake Model 250 2-28-95; 2-28-00; 3-25-20 4-11-88 3-25-87 10-5-87 1A13

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate The STC’s supporting documentation (drawings, instructions, specifications, flight manual supplements, etc.) is the property oft h eS T C holder.

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee) From (Name and address of grantor) Extent of Authority (if licensing agreement):

The STC’s supporting documentation (drawings, instructions, specifications, flight manual supplements, etc.) is the property oft h eS T C holder.

FAA Form 8110-2 (5/14) Page 3 of

3 SA2069CE-D Description of Type Design Change: (continued) REQUIRED DATA:

Lake Model 250 (with normally aspirated engine) KAP 150 and KFC 150 Three Axis Flight Control System

1. Master Drawing List 155-9419-00 dated 4-1-87.

2. Airplane Flight Manual Supplement 006-0470-01 dated 10-5-87.

Optional KAS 297B Vertical Speed and Altitude Selector

1. Master Drawing List 155-9419-00 dated 4-1-87.

2. Airplane Flight Manual Supplement 006-0470-02 dated 10-5-87.

Lake Model 250 (with turbo changed engine) KAP 150 and KFC 150 Three Axis Flight Control System

1. Master Drawing List 155-9419-00 Rev.2, dated 2-24-88.

2. Airplane Flight Manual Supplement 006-0470-01 dated 10-5-87.

Optional KAS 297B Vertical Speed and Altitude Selector

1. Master Drawing List 155-9419-00 Rev. 2, dated 2-24-88.

2. Airplane Flight Manual Supplement 006-0470-02 dated 10-5-87.

Later FAA approved revision to the Required Data listed above are incorporated without further revision to the Supplemental Type Certificate.

Limitations and Conditions: (continued) If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

------------------------------------------------------------------------------------END------------------------------------------------------------------------------------