What it approves
Extended baggage compartment installation, per Mike Smith Aero Drawing 36-1012-1, Rev. A, dated January 7, 1985, and stamped FAA Approved on February 6, 1985, or later.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This Certificate issued to
Part 3 of the Civil Air Regulations.
Description of Type Design Change: Extended baggage compartment installation, per Mike Smith Aero Drawing 36-1012-1, Rev. A, dated January 7, 1985, and stamped FAA Approved” on February 6, 1985, or later.
Limitations and Conditions: 1. This approval should not be extended to other specific airplanes of this model on which other previously approved modifications are incorporated, unless it is determined that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effect upon the airworthiness of that airplane. 2. Approval of this STC does not constitute authority to produce parts for sale. The installer must determine whether this design change is compatible with previously approved modifications. 3. Airplane Flight Manual Supplement dated February 6, 1985, is required equipment. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
D’Shannon Products, Ltd.
1309 County Road 134 Buffalo, MN 55313 3A15 Make : Beech Model : A36 (S/N E-572 through E-1370) Date of application : March 15, 1984
Date of issuance : February 6, 1985
Date reissued : January 26, 1993; September 28, 2011
( Signature) S. Frances Cox Manager, Special Certification Office Southwest Region
( Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Hawker Beechcraft Corporation | A36 | 3A15 |