STC SA2119WE

Supplemental type certificate · Sierra Industries Inc

Holder
Sierra Industries Inc · United States
Status
Current · Reissued
Status date
July 31, 2017
Applied
June 19, 1969
Product
Aircraft · Small Airplane
Certification basis
Part 3, Part 21
Data sheet
TCDS3A19

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Installation of recontoured wing leading edge, stall fences, wing tips and positive aileron seals.

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

FAA Form 8110-2 (5/14) Page 1 of 3

Reissued on July 31, 2017 to supersede the original STC, which has been lost or misplaced.

Number: SA2119WE

Part 3 of the Civil Air Regulations, effective 15 May 1956 as amended by 3-4.

Original Product – Type Certificate Number: 3A19 Make: Cessna Model: See below

Installation of recontoured wing leading edge and the following options in accordance with the drawings called for on FAA Sealed Robertson Drawing List No. 12. OPTIONS: Stall fences – Robertson Aircraft wing tips – positive aileron seals. EFFECTIVITY: 150 through 150K incorporating the 150 HP engine installation per STC SA572CE or 150D through 150K incorporating the 150 HP engine installation per STC SA1034SW.

Date of Application: June 19, 1969 Date Reissued: 8/10/72; 11/5/73; 11/8/84; 10/10/86; 7/21/05;

7/31/17 Date of Issuance: February 27, 1970 Date Amended: 11/30/70; 8/10/72

Signature

Title Jim Grigg Manager, Fort Worth A CO Branch, Compliance & Airworthiness Division Sierra Industries, Ltd.

122 Howard Langford Drive Uvalde, TX 78801

FAA Form 8110-2 (5/14) Page 2 of 3

Transfer the ownership of Supplemental Type Certificate Number: SA2119WE

To (Name and address of transferee)

From (Name and address of grantor)

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SA2119WE

FAA Form 8110-2 (5/14) Page 3 of 3

Date of Issuance: February 27, 1970 Date Amended: August 10, 1972 Date of Reissuance: July 31, 2017

The limitations specified by STC SA572CE or STC SA1034SW also apply to this modification. The approval of this change in type design applies basically to the above model aircraft only. This approval should not be extended to other aircraft of this model on which other previously approved modifications are incorporated unless it is determined that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effect upon the airworthiness of that aircraft. A copy of this certificate shall be maintained as part of the permanent records for the modified aircraft.

-END-

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SA2119WE

FAA Form 8110-2 (5/14) Page 4 of 3

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 11

MakeModelData sheet
Textron Aviation Inc.1503A19
Textron Aviation Inc.150A3A19
Textron Aviation Inc.150B3A19
Textron Aviation Inc.150C3A19
Textron Aviation Inc.150D3A19
Textron Aviation Inc.150E3A19
Textron Aviation Inc.150F3A19
Textron Aviation Inc.150G3A19
Textron Aviation Inc.150H3A19
Textron Aviation Inc.150J3A19
Textron Aviation Inc.150K3A19

Every issue · 2

DRS keeps each issue of an STC as its own record, with its own certificate and attachments.

DateStatusFiles
July 31, 2017Reissued, currentCertificate
July 21, 2005Reissued, earlier issueCertificate