What it approves
Installation of main gear wheel fairings
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Part 4a of the Civil Air Regulations.
(See Aircraft Specification No. A-718 for complete certification basis)
Installation of main gear wheel fairings in accordance with Kenney Engineering Wheel Fairing Installation Drawing No. KE3-402, dated August 2, 1969, and/or installation of nose gear wheel fairing in accordance with Kenney Engineering Installation Instruction No. KE2-42000, dated November 30, 1970, or later FAA Approved revisions.
1. Installation is approved only on aircraft Serial Nos. 113 thru 812, inclusive.
2. Installation of nose gear fairing is only approved on aircraft with nose gear fork P/N 415-34096.
3. The installer must determine whether this design change is compatible with previously approved modifications.
4. A copy of this Certificate, or later FAA approved revision, must be maintained as part of the permanent records for the modified aircraft.
5. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
Alpha Aviation, Inc.
1500 E Main St Owatonna, MN 55060 A-718 Make : Univair Aircraft Corporation Model : 415-C, 415-CD Date of application : September 30, 1969
Date of issuance : June 9, 1970
Date reissued : April 14, 1987; October 30, 2001;
February 18, 2003; September 8, 2005;
June 26, 2009; June 10, 2016 Date amended :
(Signature) Karol Mordasiewicz Manager, Airframe & Administrative Branch Chicago Aircraft Certification Office
(Title)
Original signed by:
Gregory J. Michalik
FAA FORM 8110-2-1(10-69) PAGE 2 of 2 PAGES
Number
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.