STC SA2230WE

Part 3 of the Civil Air Regulations.

(See Type Certificate Data Sheet No. A-787 for complete certification basis)

Installation of main gear wheel fairings in accordance with Kenney Engineering Wheel Fairing Installation Drawing No. KE3-400, Change A, dated March 7, 1970, or later FAA Approved revisions; and/or installation of nose gear wheel fairing in accordance with Kenney Engineering Installation Instruction No. KE2-42000, dated November 30, 1970, or later FAA Approved revisions.

1. Main gear wheel fairing installation is eligible only on aircraft with (spring gear) main gear assemblies per: Alon Drawing No.

A33300 or Mooney Drawing No. 520021.

2. Nose gear fairing installation is only approved on aircraft with nose gear fork per: Forney Drawing No. F34371 or Mooney Drawing No. 530052.

3. The installer must determine whether this design change is compatible with previously approved modifications.

4. A copy of this Certificate, or later FAA approved revision, must be maintained as part of the permanent records for the modified aircraft.

5. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

Alpha Aviation, Inc.

1500 E Main St Owatonna, MN 55060 A-787 Make : Univair Aircraft Corporation Model : A-2, A2-A, M10 Date of application : March 16, 1970

Date of issuance : August 19, 1970

Date reissued : April 14, 1987; October 30, 2001;

February 18, 2003; September 8, 2005;

June 26, 2009; June 10, 2016 Date amended : March 17, 1972

(Signature) Karol Mordasiewicz Manager, Airframe & Administrative Branch Chicago Aircraft Certification Office

(Title)

Original signed by:

Gregory J. Michalik

FAA FORM 8110-2-1(10-69) PAGE 2 of 2 PAGES

Number