What it approves
Installation of a powered cargo roller system
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This Certificate issued to Goodrich Corporation, Cargo Systems Division 2604 Highway 20 North Jamestown, North Dakota 58401 Part 25 of the Federal Aviation Regulations.
A20WE BOEING (See list of applicable models, on page 3) Description of Type Design Change: Installation of a powered cargo roller system in accordance with Aero Union Corporation Master Drawing List No. 11313, Revision “J”, dated August 9, 1994, or later FAA approved revision.
Limitations and Conditions: This approval should not be extended to other aircraft of this model on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications will produce no adverse effect upon the airworthiness of that airplane.
This determination should include consideration of significant changes in weight distribution such as an increase in the fixed disposable weight in the fuselage. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application : September 22, 1987
Date of issuance : April 8, 1988
Date reissued : March 02, 1992, August 3, 2004
Date amended : August 17, 1994
( Signature) Manager, Technical & Administrative Support Staff, Los Angeles Aircraft Certification Office ( Title)
Number SA2288SO
List of Applicable Models:
747-100 Series 747-200B Series 747-200C Series 747-100B Series 747-100B SUD Series
- END -
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.