What it approves
Aircraft design change
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Part 3 of the Civil Air R egulations.
Original Product Type Certificate N umber :
Compatibility of this design change with previously approved modifications must be determined by the installer. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
RAM Aircraft, Limited Partnership 7505 Karl May Drive Waco, TX 76708 3A25 M ake : Cessna M odel : 340 Date of application : May 20, 1976
Date of issuance : August 12, 1976
Date reissued : October 08, 2001
Date amended : October 25, 1999 Revision 16
B y direction of the A dministrator
(Signature) S. Frances Cox, Manager Special Certification Office, Southwest Region
(Title)
FAA Form 8110-2-1(10-69) Page 2 of 3
FAA Form 8110-2-1(10-69) Page 3 of 3
N umber SA2346SW Date of Issuance: August 12, 1976 Date Amended: October 25, 1999 Reissuance Date: October 8, 2001
Description of Type Design Change (Continued):
Aircraft design change is dependent upon installation option choice.
Option 1: Install Teledyne Continental Motors Model TSIO-520-J engines (310 horsepower) in accordance with RAM Drawing No. 2064, dated 3/15/99, or later FAA approved revision.
Option 2: Install Teledyne Continental Motors Model TSIO-520-N or –NB engines (310 horsepower) and McCauley or Hartzell propellers in accordance with RAM drawing No. 2064 dated 3/15/99, or later FAA approved revision.
Option 3: Install Teledyne Continental Motors Model TSIO-520-NB engines modified by Supplemental Type Certificate number SE4327SW (325 horsepower) and McCauley or Hartzell propellers in accordance with RAM Drawing No. 1014, Revision L, dated 2/19/99, or later FAA approved revision. Increase maximum take-off weight to 6290 pounds and maximum ramp weight to 6330 pounds in accordance with RAM Report No. 85-5, dated 5/15/85, or later FAA approved revision.
The appropriate RAM Airplane Flight Manual Supplement is required for the chosen installation option.
Option 1: AFMS 1090, dated 06/02/99, or later FAA approved revision.
Option 2: AFMS 1091, dated 06/02/99, or later FAA approved revision.
Option 3: AFMS 1092, dated 06/02/99, or later FAA approved revision.
-END-
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Cessna Aircraft Company | 340 | 3A25 |