STC SA2349SW

This certificate, issued to: Aviation Fabricators 805 North Fourth Street Clinton, MO 64735

* * Part of the Regulations.

(See SA2349SW Approved Model List for Certification Basis of Alteration.)

See attached FAA Approved Model List (AML), Document No. SA2349SW AML, Rev (-), or later FAA approved revisions for the list of approved airplane models, applicable installation data requirements and specific limitations.

Installation of a 3-place side-facing divan per Aviation Fabricators Drawings noted on attached FAA Approved Model List, Document No. SA2349SW AML, Revision (-), or later FAA-approved revisions.

This STC may not be installed on airplanes manufactured after December 12, 1986, except for the B200 airplanes configured with ten or more passenger seats, including the divan.

This STC approves only the installation of the parts contained in the above section “Description of Type Design Change.” The requirements for the aisle width, passenger oxygen system, Seats and Safety belts, and upholstery coverings will require a separate FAA approval to verify compatibility with installation of this STC.

Compatibility of this design change with previously approved modifications must be determined by the installer. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application: June 9, 1976 Date reissued:

Date of issuance: August 13, 1976 Date amended:

December 10, 1981; February 5, 1986;

July 22, 1987 March 14, 1988; March 23, 1988; April 5, 1988; September 13, 1989; May 26, 2006

Original signed by DW (Signature) Dan Withers Program Manager Wichita Aircraft Certification Office

(Title)

Transfer the ownership of the Supplemental Type Certificate Number to (Name of transferee) (Address of transfer) (Number and street)

(City, State, and Zip code) from (Name of grantor) (Print or type) (Address of grantor) (Number and street)

(City, State, and Zip code) Extent of Authority (if licensing agreement):

Signature of grantor ( In ink):