What it approves
Installation of two direct reading pressure gauges replacing two existing remote hydraulic pressure transmitters and electric pressure gauges
What the certificate saysOCR
This is OCR from the scanned FAA certificate. OCR can misread letters and numbers.
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: SA2371NM This certificate issued to: Flight Structures, Inc.
Part 25 of the Federal Aviation Regulations.
Original Product - Type bertificate Number: A43EU Make: Construcciones Aeronauticas, S.A. (CASA) Model: 212 CB, 212 CC Description of Type Design Change: Installation of two direct reading pressure gauges replaćing two existing remote hydraulic pressure transmitters and electric pressure gauges in accordance with FSI Drawing List No. 83FS070 Rev. C dated April 5, 1984.
Limitations and Conditions: The approval of this change in type design applies basically to the above model aircraft only. This approval should not be extended to other aircraft of this model on which other previously approved modifications are incorporated unless it is determined that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effect upon the airworthiness of that aircraft.
A copy of this certificate and the FAA approved FSI Drawing List No. 83FS070 shall be maintained as part of the permanent records for the modified aircraft.
Date of Application: October 18, 1983 Date Reissued:
Date of Issuance: April 18, 1984 Date Amended:
FEDERAL AVIATION By Direction of the Administrator yestern (Signature ) TAMINISTRAIO Manager, Seattle Aircraft Certification Office (Iitle)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.