STC SA2615NM

Un ited S tates of Am erica Department of Transportation - Federal Aviation Administration Supplemental Type Certificate

Number SA2615NM

This certificate, issued to Aviation Technical Services 3121 109th Street SW Everett, WA 98204-3500

Part 25 of the Federal Aviation Regulations. (See Type Certification Data Sheet A16WE for complete certification basis)

Original ProductType Certificate Number: A16WE Make: Boeing Model: 737-200 Series

Description of the Type Design Change: Installation of a closet in accordance with Flight Structures, Inc./TRAMCO Master Drawing List 84-FS072, Revision C or later FAA approved revisions.

Limitations and Conditions: The approval of this change in type design applies basically to the above model aircraft only. This approval should not be extended to other aircraft of this model on which other previously approved modifications are incorporated unless it is determined that the interrelationship between this change and any other previously approved modifications will introduce no adverse effect up on the airworthiness of that aircraft. The resulting interior arrangement along with the required placarding has not been evaluated and is not part of this STC. A copy of this Certificate and TRAMCO Master Drawing List 84-FS072 shall be maintained as part of the permanent records for the modified aircraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application: April 28, 1984 Date reissued: April 12, 2002; October 24, 2018 Date of issuance: June 27, 1984 Date amended:

FAA FORM 8110-2 (5/14) PAGE 1 OF 2 PAGES By direction of the Administrator

(Signature)

Manager, Seattle ACO Branch (Title)