STC SA2624NM

Number SA2624NM

This certificate, issued to: AIM Aerospace, Inc 705 SW 7th St Renton, WA 98057

Part 25 of the Federal Aviation Regulations. (See Type Certificate Data Sheet A16WE for complete certification basis.)

Original ProductType Certificate Number: A16WE Make: Boeing Model: 737-100

Description of the Type Design Change: Installation of Stow-All overhead stowage compartment support structure, stowage compartments, and sidewall panels in accordance with Federal Aviation Administration (FAA) approved KME Drawing List Numbers 2148-1DL, Revision D, dated July 3, 1984; 2148-2DL, Revision E, dated July 11, 1984; and 2148-3DL, Revision E, dated July 13, 1984, or later FAA-approved revisions.

Limitations and Conditions: The approval of this change in type design applies basically to the above model aircraft only. This approval should not be extended to other aircraft of this model on which other previously approved modifications are incorporated unless it is determined that the interrelationship between this change and any other previously approved modifications will introduce no adverse effect upon the airworthiness of that aircraft. The resulting interior arrangement, along with the required placarding, have not been evaluated and are not part of this supplemental type certificate. A copy of this certificate and Drawing Lists 2148-1DL, 2148-2DL, and 2148-3DL shall be maintained as part of the permanent records for the modified aircraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application: July 1, 1984 Date reissued: 9/7/88; 10/25/88; 7/5/11 Date of issuance: July 13, 1984 Date amended:

(Signature) Acting Manager, Seattle Aircraft Certification Office (Title)