STC SA2630CE

This certificate issued to: Aviation Fabricators 805 North Fourth Street Clinton, MO 64735

Part 3 of the Civil Air Regulations, effective May 15, 1956, plus amendments listed in the Type Certificate Data Sheet.

Original Product - Type Certificate Number : 3A20 Make : Hawker Beechcraft Model : 65, A65, A65-8200, 65-80, 65-A80, 65-A80-8800, 65-B80, 65-88, 65-90, 65-A90, 70, B90, C90, C90A, E90, H90, C90GT Description of Type Design Change:

Installation of a four-place side facing divan according to: (1) Aviation Fabricators Drawing Number D10003A, stamped “FAA Approved” with a date of May 30, 1990, or later FAA approved revision; or (2) Aviation Fabricators STC Data Package AF-278, stamped “FAA Approved” with an approval date of November 9, 1999, or later FAA approved revision.

1) This STC may not be installed on airplanes manufactured after December 12, 1986, except for airplanes configured with ten or more passenger seats, including the divan.

2) Compatibility of this design change with previously approved modifications must be determined by the installer.

3) This STC approves only the installation of the parts contained in the above section “Description of Type Design Change”. The requirements for the aisle width, passenger oxygen system, seats and safety belts, and upholstery coverings will require a separate FAA approval to verify compatibility with installation of this STC.

4) If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date amended : November 9, 1999; March 13, 2003;

July 23, 2008 By direction of the Administrator

Original signed by Robert Adamson

( Signature) Robert Adamson Program Manager Wichita Aircraft Certification Office (Title)

Date of application : August 7, 1989 Date of issuance : May 30, 1990