STC SA2633CE

This certificate issued to: Aviation Fabricators 805 North Fourth Street Clinton, MO 64735

Part 23 of the Federal Aviation Regulation, effective February 1, 1965, plus amendments listed in the Type Certificate Data Sheet.

Original Product - Type Certificate Number : A24CE Make : Beech Model : 200, 200C, 200CT, 200T, A200, A200C, A200CT, B200, B200C, B200CT, B200T, 300, 300LW, B300, B300C

Installation of a four-place side facing divan according to: (1) Aviation Fabricators Drawing Number D10003A, stamped “FAA Approved” with a date of May 30, 1990, or later FAA approved revision; or (2) Aviation Fabricators STC Data Package AF-281, stamped “FAA Approved” with an approval date of November 9, 1999, or later FAA approved revision.

1) This STC may not be installed on airplanes manufactured after December 12, 1986, except for airplanes configured with ten or more passenger seats, including the divan.

2) Compatibility of this design change with previously approved modifications must be determined by the installer.

3) If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

4) This STC approves only the installation of the parts contained in the above section “Description of Type Design Change”. The requirements for the aisle width, passenger oxygen system, seats and safety belts, and upholstery coverings will require a separate FAA approval to verify compatibility with installation of this STC.

Date of application : August 7, 1989 Date of issuance : May 30, 1990 Date reissued :

Date amended : November 9, 1999; March 13, 2003;

August 21, 2008

Original signed by Robert Adamson

( Signature) Robert D. Adamson FAA Program Manager, Continued Operational Safety Wichita Aircraft Certification Office (Title)