STC SA2634WE

FAA Form 8110-2(10-68) Page 1 of 2 Number SA2634WE This Certificate issued to Northrop Grumman Systems Corporation 21240 Burbank Blvd.

Woodland Hills, CA 91367-6675

Part 4b of the Civil Air Regulations.

Dated 31 December 1953 (See T.C. Data Sheet 4A25) Original Product Type Certificate Number :

4A25

McDonnell Douglas

DC-8-63F Description of Type Design Change : Installation of three Litton LTN-72 Inertial Navigation System in accordance with FAA sealed Litton Drawing Numbers 678278-08, 454020-01, 454021-01, and 454022-

01. FAA approved Litton Systems, Inc. Airplane Flight Manual Supplement to Douglas Report No. DAC- 33163 dated January 9, 1973 or later FAA approved revision is required.

Limitations and Conditions: The approval of this change in type design applies basically to this model only. This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications will introduc e no adverse effect upon the airworthiness of that aircraft. A copy of this certificate must be maintained as part of the permanent records for the modified aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application: December 15, 1972

Date of issuance: January 9, 1973

Date reissued: April 12, 2016

(Signature) Supervisor, Technical & Administrative Support Staff Los Angeles Aircraft Certification Office (Title)

NOTE:

DO NOT DELETE THIS PAGE.

DO NOT ADD ANY DATA TO THIS PAGE.

THIS PAGE IS FOR PAGE NUMBERING PURPOSES, PLEASE DISCARD PRINTED COPY.