What it approves
Installation of Truboplus/ Electronics Int'l gauges and switches.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
United States of America Department of Transportation_Federal Aviation Administration Supplemental Type Certificate Number SA2687NM This certificate, issued to: Aero Manufacturing, Inc.
2905 Jahn Avenue NW #4 Gig Harbor, WA 98335
Part * of the * Regulations.
Original Product-Type Certificate Number: *See attached FAA Approved Model List (AML) Make: No. SA2687NM for a List of Approved Models Model: and Applicable Airworthiness Regulations.
Description of the Type Design Change: Installation of a Turboplus/Electronics International, Inc., gauges and switches to reflect new Turboplus, Inc. face plates to re-disignate selected functions or switch positions as listed below. In addition, this installation includes EGT/CHT/TIT and oil temperature probes, extension leads and associated accessories in accordance with Turboplus, Inc. Installation Instructions No. TP-360 and TP-520, dated December 4, 1984, or later FAA approved revisions.
(See “Continuation Sheet ” Page 3 of 4 Pages)
Limitations and Conditions: Approval of this change in type design applies to the aircraft models listed on the AML only. This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft. A copy of this Certificate and FAA Approved Model List No.
SA2687NM, must be maintained as part of the permanent records for the modified aircraft. (See “Continuation Sheet” Page 4 of 4 Pages)
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
This certificate and the supporting data which is the ba sis for approval shall remain in effect until surrendered, suspended, revoked, or a termination date is otherwise established by the Administrator of the Federal Aviation Administration.
Date of application: December 6, 1984 Date reissued: 10/30/87; 02/24/92; 10/25/00 Date of issuance: January 11, 1985 Date amended: 06/10/87; 10/25/00 By direction of the Administrator
(Signature) Acting Manager, Seattle Aircraft Certification Office (Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 886
Every issue · 2
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| October 25, 2000 | Amended, current | CertificateApproved model list |
| October 24, 2000 | Amended, current | CertificateApproved model list |