STC SA2700WE

Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: SA2700WE This certificate issued to: Airborne Electronics 899 Haddock Street Foster City, C: 94404 Certifies that the change in the type design for the following product with the limitations and conditions therefor as specified hereen meets the airerhiness requirement's of Furt 3 If the Civil Air Regulations.

Original Product -Sype tertificate. Member: A-777 Make: Beech Medel A35, 35, B35, C35, D35, E35, F35, G35 Description of Type Design Change:

Installation of Airborne Electronics Solid State Automatic Propeller Control Model 350A in accordance with FAA sealed Airborne Electronics Top Drawing List No. 0350-0000, Revision El, dated April 27, 1976, or later FAA sealed revision, in place of Flight Research Engineering Corporation APC Model 31A installed in Beech airplane.

See Page 3 of this STC.

47 FAA FORM 8110-2 (10-68; Page 1 of 3 Pages

Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number: SA2700WE March 28, 1977 Limitations and Conditions:

The approval of this change in type design applies basically to Beech Models 35, A35, B35, C35, D35, E35, and F35, with Continental Engine E185 and Beech Propeller Hub 215-107 with blades 215-207-88; and Beech Models 35, A35, B35, C35, D35, E35, F35, G35 with Continental Engine E225-8 and Beech Propeller Hub 215-107 with blades 215-213-84 only. This approval should not be extended to other specific airplanes of this model on which other previously approved modifications are incorporated unless it is determined that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effect upon the airworthiness of that airplane.

FAA approved Airborne Electronics Airplane Flight Manual Supplement No. 0350- 0004A, dated March 17, 1976, must be carried in aircraft.

FAA FORM 8110-2-1 (10-59) PAGE 3 OF 3 PAGES FAA AC 73-2651