What it approves
Installation of 114-place interior for a military Advanced Airborne Command Post, lower lobes configured for inflight work areas, trailing wire antennas, external antennas; modification of air conditioning and power generation/distribution systems and installation of mission equipment (Command, Control and Communication Subsystems).
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SA2703SW This Certificate issued to L-3 Communications Integrated Systems L.P.
10001 Jack Finney Blvd.
Greenville, TX 75402 Part 25 the Federal Aviation Regulations.
Original Product Type Certificate Number: A20WE Make : Boeing Model : 747-E4-B Description of Type Design Change:
114-place interior for a military Advanced Airborne Command Post, lower lobes configured for inflight work areas, trailing wire antennas, external antennas;
modification of air conditioning and power generation/distribution systems and installation of mission equipment (Command, control and communication subsystems) in accordance with E-Systems “Drawing Submittal List, E4-B Modification, 60-062-AB Report 00004,” Rev. C, or later FAA approved revision.
Date of application : January 15, 1975 Date reissued : July 29, 2002
Date of issuance : December 29, 1977 Date amended : December 15, 1978, Revision 1 By direction of the Administrator
(Signature) S. Frances Cox, Manager Special Certification Office, Southwest Region
(Title)
FAA Form 8110-2-1(10-69) Page 3 of 3
Number SA2703SW Reissuance Date: July 29, 2002
Limitations and Conditions:. (Continued)
l. Aircraft design does not comply with FAR Part 25 in several areas due to mission requirements. Deviations are noted in the above “Drawing Submittal List.”
2. The airstair is approved under separate STC.
3. Not approved for trailing wire antenna in the extended position.
4. FAA Approved Airplane Flight Manual Supplement dated December 29, 1977, is required.
5. Compatibility of this design change with previously approved modifications must be determined by the installer.
6. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
-END-
Transfer the ownership of Supplemental Type Certificate Number
to (Name of transferee) (Address of transferee) (Number and street)
(City, State, and Zip code) from (Name of grantor) (Print or type) (Address of grantor) (Number and street)
(City, State and Zip code) Extent of Authority (if licensing agreement):
Signature of grantor (In ink):
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| The Boeing Company | 747-200B Series | A20WE |