STC SA2774CE

This certificate issued to: Aviation Fabricators, Inc.

805 North Fourth Street Clinton, MO 64735

Part 23 of the Federal Aviation Regulations. Effective February 1, 1965, plus amendments listed on the Certificate Data Sheet Original Product - Type Certificate Number : A24CE Make : Beech Model : 200; 200C; 200CT; 200T; A200; A200C; A200CT; B200; B200C B200CGT; B200CT; B200GT; B200T; 300; B300; B300C; 300LW

Description of Type Design Change: Install passenger seat with hinged backrest per Aviation Fabricators Drawing list Number AF-151 stamped “FAA Approved” with a date of November 12, 1991 or later FAA approved revision

1. Compatibility of this design change with previously approved modifications must be determined by the installer.

2. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

3. This STC approves only the installation of the parts contained in the above section “Description of Type Design Change.” The requirements for the aisle width, passenger oxygen system, seats and safety belts, and upholstery coverings will require a separate FAA approval to verify compatibility with installation of this STC.

Date of application : July 23, 1991 Date of issuance : November 12, 1991 Date reissued :

Date amended : December 12, 2003, November 26, 2004;

September 3, 2010

Original signed by Steven C. Litke ( Signature) Steven C. Litke Program Manager Wichita Aircraft Certification Office (Title)