What it approves
Install passenger seat with hinged backrest per Aviation Fabricators Drawing list Number AF-149 stamped "FAA Approved" with a date of November 13, 1991 or later FAA approved revision.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Part 23 of the Federal Aviation Regulations. Effective February 1, 1965, plus amendments listed on the Certificate Data Sheet.
Description of Type Design Change: Install passenger seat with hinged backrest per Aviation Fabricators Drawing list Number AF-149 stamped “FAA Approved” with a date of November 13, 1991 or later FAA approved revision.
1. Compatibility of this design change with previously approved modifications must be determined by the installer.
2. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
3. This STC approves only the installation of the parts contained in the above section “Description of Type Design Change.” The requirements for the aisle width, passenger oxygen system, seats and safety belts, and upholstery coverings will require a separate FAA approval to verify compatibility with installation of this STC.
Aviation Fabricators, Inc.
805 North Fourth Street Clinton, MO 64735 A31CE Make : Beech Model : F90
Date of application : July 23, 1991
Date of issuance : November 13, 1991
Date amended : December 12, 2003
( Signature) Joel M. Ligon Program Manager Wichita Aircraft Certification Office
( Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Raytheon Aircraft Company | F90 | A31CE |