STC SA2777CE

This certificate issued to: Aviation Fabricators, Inc.

804 North 4 th Street Clinton, MO 64735

Part 23 of the Federal Aviation Regulations. Effective February 1, 1965, plus amendments listed on the Certificate Data Sheet.

Original Product - Type Certificate Number : 3A20 Make : Beech Model : 65, A65, 65-80, 65-A80, 65-B80, 65-88, 65-90, 65-A90, 70, B90, C90, C90A, E90, C90GT

Install passenger seat with hinged backrest per Aviation Fabricators Drawing List No. AF-148 stamped “FAA Approved” with a date of November 13, 1991, or later FAA-approved revision.

1. Compatibility of this design change with previously approved modifications must be determined by the installer.

2. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

3. This STC approves only the installation of the parts contained in the above section “Description of Type Design Change”. The requirements for the aisle width, passenger oxygen system, seats and safety belts, and upholstery coverings will require a separate FAA approval to verify compatibility with installation of this STC.

Date amended : December 12, 2003; October 24, 2007

Original signed by Steven Litke

( Signature) Steven Litke Program Manager Wichita Aircraft Certification Office (Title) Date of application : July 23, 1991 Date of issuance : November 13, 1991