STC SA2815WE

This Certificate issued to Staggerwing Museum Foundation, Inc.

560 Old Shelbyville Highway Tullahoma, TN 37388 Part 03 of the Civil Air Regulations, effective November 13, 1945 and Part 3 effective November 1, 1949, as amended by 3-134 (paragraph

3.242) (Normal Category).

A765 BEECH D18C, D18S, E18S-9700, G18S, H18, C45G, C45H, TC45G, TC45H, TC45J (SNB-5), JRB-6, 3N, 3NM, 3TM, E18S

Description of Type Design Change: Removal of fabric covering from the wing flaps, ailerons, rudders, and elevator and replace and recover these surfaces with aluminum in accordance with FAA sealed Hamilton Drawing No. 98-000.

Limitations and Conditions: The approval of this change in type design applies basically to Beech Models D18C, D18S, E18S-9700, G18S, H18, C45G, C45H, TC45G, TC45H, TC45J (SNB-5), JRB-6, 3N, 3NM, 3TM, E18S Aircraft only. This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effect upon the airworthiness of that aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission

Date of application : September 26, 1973

Date of issuance : February 14, 1974

Date reissued: April 28, 1977; September 3, 2004

( Signature) Manager, Technical & Administrative Support Staff, Los Angeles Aircraft Certification Office ( Title)