STC SA2925NM

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number SA2925NM This certificate issued to: AAR Oklahoma, Inc.

Part 23 of the Federal Aviation Regulations.

Original Product - Type-Certificate Number: A34CE Make: Cessna Model: 1303, Normal Category Description of Type Design Change: . Installation of a camera hole and viewing port in accordance with AAR Western Drawing List No. 1503-CH, dated April 24, 1985• NOTE: This STC approves the installation of a camera hole and doors, viewing port, the rerouting of elevator, rudder, flap and trim cables around the camera hole with associated electrical and vacuum system provisions. Additional FAA approval will be required for the physical installation of any cameras. See Flight Structure Report No. 84FS139D1, Revision "A", dated March 13, 1985, for camera installation structural considerations.

Limitations and Conditions: Data pertaining to this modification are considered inadequate for duplication in other aircraft. This approval is limited to the installation in Cessna model 1303 aircraft, Serial Number T30300206 only. The modified airplane must be operated in accordance with a copy of the FAA Approved Airplane Flight Manual Supplement dated May 15, 1985, or later FAA approvec revision. A copy of this Certificate and Airplane Flight Manual Supplement shall be maintained as part of the permanent records for the modified aircraft.

Date of Application: February 8, 1985 Date Reissued: JUly 22, 1988 Date of Issuance: May 15, 1985 Date Amended:

FEDERAL AVIATION By Direction of the Administrator ignature OMINISTRATO Manager, Seattle Aircrait Modification Branch (Title)

47.