What it approves
Installation of high pressure deicer boots.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
nf ^ratispnrtalmn - Afcraiion Abmtmstratinn e Certificate Signature Flight Support Corporation, a Delaware Corporation 7511 Lemmon Avenue, Hangar C Dallas, TX 75209 723 Lockheed ^f&H&f.- 18 Civil Air Installation of Hi-pressure De-icer Boots in accordance with Howard Aero, Inc.
Engineering Report No. 420 Revision A dated 10/25/63, or later FAA approved revision.
This STC is part of the basic Howard 250 and H250 Tri-Gear configurations.
Compatibility of this modification with other previously approved modifications must be determined by the installer.
.-October 23, 1963 October 29, 1963 .-9/4/92; 12/21/98; 8/31/00 . February 25, 1982 Rev. 7 f (Signature) 'S. Frances Cox Manager, Special Certification Office, Southwest Region '(Title) Any alteration of ChJff certificate is punlshfble by a fine of not exceeding $1,000, or Imprisonment not exceeding 3 years, of both- FAA Form 8110-2(10-661 Paqs 1 of 2 Thij certificate aray be transferred In accordance wj[n F
INSTRUCTIONS; The transfer endorsement below may be used to notify the appropriate FAA Regional Office of the transfer of tha Supplemental Type Certificate.
The FfiA will raigaua tha certificate in the name of the transferee and forward it to him.
TRANSFER ENDORSEMENT Transfer the ownership of Supplemental Type Certificate Number to (Name of transferee) (Address of transferee) {Number and street} (City, State, and ZIP code) from (Name of grantor) (Print or type) (Address of grantor) (Number s street) (City, State, and ZIP code) Extent of Authority (if licensing agreement):
Signature of grantor (In ink):
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Lockheed Martin Aeronautics Company | 18 | A-723 |