What it approves
Fabrication and installation of pilot's and co-pilot's seat.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
SA3215NM Luscombe Aircraft Corporation 3301 Turner Road Jamestown, NY 14701 4a Civil Air Regulations A-694 Luscombe 8A,8B,8C,8D,8E,8F Fabrication and Installation of a pilot's and co-pilot's seat in accordance with FAA Sealed Luscombe NNB Contour Seat Fabrication and Installation Instructions No. NNB-100, Rev. NC, dated 12/15/85, or later FAA Approved revision.
(See Continuation Sheet Page 3 of 3 Pages) November 6, 1985 July 19, 2002, July 24, 2002, November 14, 2019, February 26, 2021 December 27, 1985 Manager, Technical & Administrative Support Section Los Angeles ACO Branch 3
SA3215NM 3
SA3215NM Approval of this change in type design applies to the above model aircraft only. This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft. A copy of this certificate must be maintained as part of the permanent records of the modified aircraft.
-END- 3 3
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 7
Every issue · 3
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| February 26, 2021 | Reissued, current | Certificate |
| November 14, 2019 | Reissued, earlier issue | Certificate |
| July 24, 2002 | Reissued, earlier issue | Certificate |