What it approves
Bendix wheels and brakes installation.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
United States Of America Department of Transportation - Federal Aviation Administration Supplemental Type Certificate This certificate has been reissued to replace the original certificate reported as lost.
This Certificate issued to United Aeronautical Corporation 7360 Laurel Canyon Blvd.
North Hollywood, California 91605 Part 4a of the Civil Air Regulations.
Dated November 1, 1943 and Part 4b dated November 9, 1945.
A-762 The Boeing Company C54-DC, C54A-DC, C54D-DC, C54E-DC, C54G-DC, and DC-4 Description of Type Design Change: Bendix wheels and brakes installation as per sealed Aero Union Corporation Drawing No. 4-7035, New, dated September 17, 1976, or later sealed revision.
Limitations and Conditions: This approval should not be extended to other aircraft of this model on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change any of those other p reviously approved modifications will introduce no adverse effect upon the airworthiness of that aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application : May 11, 1976
Date of issuance : November 23, 1976
Date reissued : April 15, 2015
(Signature) Supervisor, Technical and Administrative Support Staff Los Angeles Aircraft Certification Office (Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 6
Every issue · 2
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| April 15, 2015 | Reissued, current | Certificate |
| November 23, 1976 | Issued, earlier issue | Certificate |