STC SA3347NM

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: SA33478N1M This certificate issued to: C & C AViAtion Certifies that the change in the type design for the following product with the limitations and conditions therefor aspecified hereonneels the airworthiness sequirements of Purt * of the * Pregulations Original Product - Type bertificate Numben: Make: * * *See attached Master Eligibility List (MEL) No. SA3347NM for list of approved airplane models and applicable airworthiness Model: * regulations.

DesriplinType Design hange. spot ted Unen stated table ance with Union er nd brake control, Model Aviation Installation Instructions, dated October 15, 1975. Aircraft may be operated with or without the Model "C" Control installed.

NOTE: This approval requires that Cessna rudder pedal, part No. 1460320-1, be installed in the aircraft.

Limitations and Conditions: Approval of this change in type design applies to the above model aircraft only. This approval should not be extended to aircraft of this model on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upor the airworthiness of that aircraft. A copy of this Certificate, Master Eligibility List, and FAA Flight Manual Supplement dated April 7, 1986, or later FAA approved revision, must be maintained as part of the permanent records for the modified aircraft

Date of Application: March 6, 1986 Date Reissued:

Date of Issuance: Apri1 7, 1986 Date Amended: November 21, 1986, September 30, 1987 FEDERAL NUTATION Pary direction of the Sldministrater кля Signatures pen TAMINIST RANDO Assistant Manager, Seattle -Aireraft Certifigation Office

47.