What it approves
Installation of a main cabin cargo handling system.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SA3415NM
This Certificate issued to
Part 25* of the Federal Aviation Regulations.
*Certification basis is set forth in Type Certificate Data Sheet A22WE.
Description of Type Design Change: Installation of a Main Cabin Cargo Handling System in accordance with FAA approved Ancra International LLC, Controlled Drawing List No. DL 80450, Revision “D”, dated July 30, 1987, or later FAA approved revision.
Limitations and Conditions: The installation should not be incorporated in any aircraft unless it is determined that the interrelationship between this installation and any previously approved configuration will not introduce any adverse effect upon the airworthiness of the aircraft. The approval of this modification applies to the above noted airplane model series only. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Ancra International LLC 875 W. 8th Street Azusa, California 91702 A22WE
Boeing
DC-10-10F, DC-10-30F, MD-10-10F, and MD-10-30F Original Product Type Certificate Number :
Date of application : March 11, 1987
Date of issuance : August 14, 1987
Date reissued : January 30, 1992; October 8, 1996; March 29, 2012
Date amended : September 11, 2000
( Signature) Supervisor, Technical & Administrative Support Staff Los Angeles Aircraft Certification Office
( Title)
Number (STC No.)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.