What it approves
Installation of cargo pallet folding side restraint.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SA3485NM
This Certificate issued to
Part 25* of the Federal Aviation Regulations.
*Certification basis is set forth in Type Certificate Data Sheet A20WE.
Description of Type Design Change: Installation of Cargo Pallet Folding Side Restraint in accordance with FAA approved Controlled Drawing List, Ancra Report No. DL 80461, Revision “A”, dated August 6, 1987, or later FAA approved revision.
Limitations and Conditions: The installation should not be incorporated in any aircraft unless it is determined that the interrelationship between this installation and any previously approved configuration will not introduce any adverse effect upon the airworthiness of the aircraft. The approval of this modification applies to the above noted airplane model series only. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Ancra International LLC 875 W. 8th Street Azusa, California 91702 A20WE
Boeing
747-100F, -200F, -300F, and -400F Series Original Product Type Certificate Number :
Date of application : May 15, 1987
Date of issuance : August 28, 1987
Date reissued : January 30, 1992; June 10, 1992; October 8, 1996; March 29, 2012
Date amended : October 6, 1987; September 28, 1989; September 7, 2000
( Signature) Supervisor, Technical & Administrative Support Staff Los Angeles Aircraft Certification Office
(Ti l )
Number (STC No.)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.