What it approves
Removal of the three degree offset from the vertical stabilizer, addition of the airfoil shape to the top of the horizontal stabilizer, and move of the turbine aft by 13 inches in accordance with Drawing Numbers 7061, 7062, 7063, and Drawing List No. 70001 revised 10/10/85.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Part 8 of the Civil Air Regulations.
Removal of the three degree offset from the vertical stabilizer, addition of the airfoil shape to the top of the horizontal stabilizer, and move of the turbine aft by 13 inches in accordance with Drawing Numbers 7061, 7062, 7063, and Drawing List No. 70001 revised 10/10/85.
This approval is limited to the installation made in Grumman Model G-164C, Serial Number 22C.
The installer must determine whether this design change is compatible with previously approved modifications. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
Turbine Conversions, Ltd.
18155 120th Avenue Nunica, MI 49448 1A16 Make : Grumman Model : G-164C Date of application : October 08, 1985
Date of issuance : October 22, 1985
Date reissued : May 10, 2011
( Signature) M. Monica Merritt, Manager Airplane Certification Office, Southwest Region
( Title)
FAA Form 8110-2-1(10-69) Page 2 of 2
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Allied Ag Cat Productions Inc. | G-164C | 1A16 |