STC SA3531NM

United States of America Department of Transportation_Federal Aviation Administration Supplemental Type Certificate Number SA3531NM

This certificate, issued to Bogert Aviation 3606 N. Swallow Ave.

Pasco, WA 99301

Part * of the * Regulations.

Original Product⎯Type Certificate Number: *See attached FAA Approved Model List (AML) Make: No. SA3531NM for a list of approved aircraft Model: models and applicable airworthiness regulations.

Description of the Type Design Change: Installation of copper electrical cables in accordance with Bogert Aviation Installation Instructions as listed on AML No. SA3531NM, amended April 1, 1999, or latter FAA approved revision.

Limitations and Conditions: Approval of this change in type design applies to the aircraft models listed on the AML only. This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft. A copy of this certificate and FAA AML No. SA3531NM must be maintained as part of the permanent records for the modified aircraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application: May 27, 1986 Date reissued: September 30, 2005 Date of issuance: July 15, 1986 Date amended: April 10, 1989; April 1, 1999

(Signature)

Acting Manager, Seattle Aircraft Certification Office (Title)