STC SA3829NM

Number SA3829NM

This certificate, issued to Milman Engineering, Inc.

19207 Guava St. SW Rochester, WA 98579

Part * of the * Regulations.

Original ProductType Certificate Number: * See attached Federal Aviation Administration (FAA) Make: Approved Model List (AML) SA3829NM for approved Model: aircraft models and applicable airworthiness regulations

Description of the Type Design Change: Installation and Manufacturing of Aluminum Wing Spars in accordance with the master drawing list as listed on the AML or later FAA-approved revision.

Limitations and Conditions: Approval of this change in type design applies to the aircraft listed on AML SA3829NM only. This approval should not be extended to other aircraft of this model on which other previously approved modifications are incorporated unless it is determined by the installer that the relationship between this change and other previously approved modifications will introduce no adverse effect upon the airworthiness of that aircraft.

A copy of this certificate and AML SA3829NM, must be maintained as part of the permanent records for the modified aircraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application: October 16, 1984 Date reissued: February 6, 1992 Date of issuance: April 22, 1987 Date amended: 5/10/88; 6/16/03; 9/9/04; 4/4/17

(Signature)

Manager, Seattle Aircraft Certification Office (Title)