What it approves
Revised horizontal stabilizer angle of incidence from -2 degrees to -1/2 degrees.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This certificate issued to: Staggerwing Museum Foundation, Inc.
560 Old Shelbyville Hwy Tullahoma, TN 37388
Part * of the Civil Air Regulations. * CAR 03 effective 11/13/45.
Original Product - Type Certificate Number : 765 Make : Beech Model : D18S, C-45G/H, and TC-45G/H
Revised horizontal stabilizer angle of incidents from -2° to -1/2° in accordance with Airline Training, Inc. Dwg.
No. 2103A; or 2103C; or 2103E; or 2103G or 2103H and 2104; or 2103F.
(1) This modification is applicable only when installed in conjunction with STC SA4-113 (Airline Training Safety Performance Kit).
(2) Airline Training, Inc. CAA approved Airplane Flight Manual Supplement dated 10/21/55 with pertinent revisions to Beech D18S Flight Manual required with this modification installed on Beech D18S.
(3) ATI CAA approved Airplane Flight Manual Supplement dated 08/20/58 or as revised 11/14/58, to Beech C-45G, C-45H, TC-45G, and TC-45H Flight Manual required with this modification installed on Beech C-45G, C-45H, TC-45G, or TC-45H.
Date reissued : May 22, 1967; August 15, 1968;
February 26, 1990; October 6, 2006 Date amended : October 28, 1956; August 19, 1958;
September 11, 1959 By direction of the Administrator
Original signed by Robert D. Adamson
( Signature) Robert D. Adamson Program Manager Wichita Aircraft Certification Office (Title) Date of application : October 12, 1956 Date of issuance : October 12, 1956
FAA FORM 8110-2-1(10-69) PAGE 3 of 3 PAGES
Number SA4-119
Date of Issuance: October 12, 1956 Date Amended: October 28, 1956 Date Amended: August 19, 1958 Date Amended: September 11, 1959 Date Reissued: May 22, 1967 Date Reissued: August 15, 1968 Date Reissued: February 26, 1990 Date Reissued: October 06, 2006
(4) C.G. +109.8” forward to +117.7” rearward.
(5) Airworthiness compatibility of this STC with all other major changes to the standard original model(s) shown above should be confirmed prior to installation of this STC.
(6) If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
--END--
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.