What it approves
Reinforcing structure.
What the certificate saysOCR
This is OCR from the scanned FAA certificate. OCR can misread letters and numbers.
FS - 4102 FEDERAL AVIATION AGENCY FORM APPROVED, BUDGET BUREAU NO. 04-R015
INSTRUCTIONS - SUBMIT IN TRIPLICATE TO LOCAL FAA FLIGHT STANDARDS INSPECTOR.
Supplemental Type Certificate COPY WILL BE RETURNED TO APPLICANT UPON
ISSUANCE
1. NAME AND ADDRESS OF APPLICANT 2- Supplemental Type Certificate APPLIED FOR:
Lockheed Aircraft Service, Inc.
Ontario, California AIRCRAFT ENGINE PROPELLER
ORIGINAL MODEL DESIGNATION L1649A (LOCKHEED) NEW MODEL DESIGNATION (If desired) L1649A/02
3. DESCRIPTION OF CHANGE Install reinforcing structure to permit operation at higher zero fuel and landing weights under SR411A.
Structural installation in accordance with LAS Drawing List No. 4012716, dated January 17, 1961.
Limitation on Applicability: The approval of this change in Type Design applies only to Lockheed Model 16u9A airplanes previously modified in accordance with STC's Nos. SAl-1215 or SAl-1295. This approval should not be extended to other specific airplanes of this model on which other previously approved modifications are incorporated unless it is determined push saved tRi gabong vill introduce no adverse effoct upon thre- MILL DATA BE AVAILABLE FOR SALE OR RELEASE TO OTHER PERSONS? YES NO
b. WILL PARTS BE MANUFACTURED FOR SALE (Ref. CAR 1.55)? YES NO
5. SIGNATURE AND TITLE OF APPLICANT Lewis SIGNATURE 17 January 1961 Manager, Engineering Department Date of Application: TITLE
6. To be Completed by FAA
NATURE AND LOCATION OF DATA Engineering and Manufacturing Branch, FAA, and Lockheed Aircraft Service, Inc., Ontario, California.
Certification Basis: Refer to Aircraft Specification 4Al7 Certification Basis as listed except Amendment 4b-3, paragraphs 2l through 33 and 39 are no longer applicable.
ORIGINAL TYPE CERTIFICATE NO. FAA APPROVAL 4A17 ORIGINAL SIGNED BA
SABLES R HAWES Supplemental Type Certificate NO.
Charles R. Hawks SIGNATURE SA 4-1402
DATE OF APPROVAL February 16, 1960 Chief, Engineering and Manufacturing Branch TITLE * U.S. GOVERNMENT PRINTING OFFICE: 1959 0-509657 FORM FAA-2417 (5-59)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Lockheed Aircraft Corporation | 1649A-98 | 4A17 |