What it approves
Installation of dual camera port, view finder hole, camera mount for RMKA8.5/23 and RMKA 15/23, intervalometer, and autopilot servo relocation.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Part 3 of the Civil Air R egulations.
Original Product Type Certificate N umber :
Installation of dual camera port, view finder hole, camera mount for RMKA8.5/23 and RMKA 15/23, intervalometer, and autopilot servo relocation according to Drawing C31001, Revision D (24 sheets) dated 10/30/81, or later FAA approved revision.
Occupancy is limited to pilot, co-pilot, and camera operator when camera is installed.
Compatibility of this design change with previously approved modifications must be determined by the installer. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
RAM Aircraft, Limited Partnership 7505 Karl May Drive Waco, TX 76708 3A25, 3A10 M ake : Cessna M odel : 320F, T310Q, 320E Date of application : April 27, 1979
Date of issuance : July 06, 1979
Date reissued : October 8, 2001
Date amended : 11/29/79; 4/14/82 Revision 2
B y directi on of the A dministrator
(Signature) S. Frances Cox, Manager Special Certification Office, Southwest Region
(Title)
FAA Form 8110-2-1(10-69) Page 2 of 2
Number SA4012SW Date of Issuance: July 06, 1979
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.