What it approves
Installation of S-TEC system 60-1 single axis flight guidance system, Model ST-003.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
United $tatu of amenta Bcpartment of transportation—federal atoiation administration Supplemental "Cgpe Certificate SA4112SW S-TEC Corporation Rt. 4, Bldg. 946 Wolters Industrial Complex Mineral Wells, Texas 76067 ^-<^^/i^z4l^^i^^^;<&&«W^ £^^at^t>(^^^ne^^/>^apu^^e^n^n^^^^ 3 ^J&& Civil Air 3A13 Cessna : 182P, : installation of S-TEC System 60 Single Axis Flight Guidance System Model ST-003 according to bulletin No. 103, Revision 6, dated 7-18-81 and Master Drawing List No. 9204, Revision F, dated 7-18-81, or later FAA approved revision. (14 Volt System)
•• See Continuation Sheet, page 2 of this STC.
April 16, 1980 April 21, 1980 ^ .
7/30/80; 6/2/81; 8/27/81 Revision 3 _ / && 41//W /lSl4-(f • (Signature P. Watson Chief, Engineering and Manufacturing branch (Title)
FAA FOIM 8110-2 (10-68)
ttnittd States of amorfra .
Bcpartmcnt of transportation— Jredcral Nation administration Supplemental t;gpe Certificate(Continuation Sheet) SM112SW Revision 3 Limitations and Conditions:
1. FAA Approved Airplane Flight Manual Supplement P/N 8902 dated 4/21/80 is required.
2. FAA Approved Supplemental Flight Manual P/N 8902-1 dated 8-2?-81 is required for Cessna Model 182P and Cessna Model 182^, S/N 18266590 and 3ELCW with S-TEC System 60 Single Axis Automatic Flight guidance System, Model ST-003;
or Pilot's Operating Handbook and FAA Approved Airplane Flight Manual Supplement P/N 8971 dated 8/27/81 is required for Cessna Model 182.Q S/N 18266591 and UP with S-TEC System 60 Single Axis Automatic Flight Control System Model ST-003.
3. Compatibility of this modification with other previously approved modifications must be determined by the installer.
FAA FORM 8110-2-1 (1O-69) PAGE 2 OF 2
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.