What it approves
Installation of a Flap and Landing Gear Aural Warning System
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
United States Of America Department of Transportation - Federal Aviation Administration Supplemental Type Certificate This certificate has been reissued to replace the original certificate reported as lost.
This Certificate issued to United Aeronautical Corporation 7360 Laurel Canyon Blvd.
North Hollywood, California 91605 Part *4b of the Civil Air Regulations. * (per SFAR 13).
A-618 The Boeing Company DC3-G102, -G102A, -G103A and -202A
Description of Type Design Change: Installation of a Flap and Landing Gear Aural Warning System in accordance with Aero Union Drawing AU8503, Revision “A”, dated November 29, 1979.
Limitations and Conditions : The approval of this change in type design applies t o Boeing Model DC3-G102, -G102A, -G103A, and - 202A airplanes only. This approval should not be extended to other aircraft of this model on which other previously approved modifications are incorporated unless it is determined by the installer that the int errelationship between this change and any of those other previously approved modifications will not introduce no adverse effect upon the airworthiness of that aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application : December 12, 1979
Date of issuance : May 8, 1980
Date reissued : April 15, 2015
(Signature) Supervisor, Technical and Administrative Support Staff Los Angeles Aircraft Certification Office (Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.