STC SA4176SW

ttnitrd States of amtrica Bcpartmcnt of transportation—federal atriation Administration Supplemental i:gpe Certificate *slea4ACa£&n*i.

<-/utmvw SA4176SW DT83-1SW FKP-190 S-TEC Corporation Rt. 4, Bldg. 946 Wolters Industrial Complex Mineral Wells, Texas 76067 s6uJi&j£bea4ia#vf^^ri&ft>(£0a>tm^ J^Mi/>**Mr^^ 3 Civil Air 2A3 Mooney M20F, M20G, M20J installation of S-TEC System 60 Two Axis Flight Guidance System, Model ST-015, with Optional Autotrim System according to Bulletin No. 115, Revision 5, dated 5/10/82 and Master Drawing Ust No. 9212, Revision E, dated 5/10/82, with Optional Flight Director Steering Horizon;

or according to later FAA approved revision. (14 Volt System) See Continuation Sheet, page 2, of this STC.

C77 <JZe<&M><i6 S$drni*n4A/f€i&i^^fJ&e' : 8/10/81; 7/12/82; 7/30/82 Revision 3 jo, 1980 August 11, 1980 (Signature) Don P. Watson Manager, Aircraft Certification DivisionSouthwest Region (Title)

47.

ttnitrd Stoats of anttrira Bcpartment of tonfiportation— .federal atriation administration oipplemental ICgpe Certificate(Continuation &heet) SA4176SW Revision 3 Limitations and Conditions:

1. Pilot's Operating Handbook and FAA Approved Airplane Flight Manual Supplement P/N 8909 dated 8/11/80 Is required for Mooney Models M20F and M20J; OR, FAA Approved Supplement to Pilot's Operating Handbook and/or FAA Approved Airplane Flight Manual, P/N 8909-1 dated 7/12/82, Is required for Mooney Model M20J; OR, FAA Approved Supplement to Pilot's Operating Handbook and/or FAA Approved Airplane Flight Manual P/N 8909-2 dated 7/30/82 is required for Mooney Model M20J with S-TEC System 60 Two Axis Automatic Flight Guidance System with Optional Autotrim System (Using Roll Servo P/N 0105-1-R2); OR, FAA Approved Supplemental Flight Manual P/N 89125 dated 7/12/82 is required for Mooney Models M20F and M20G with S-TEC System 60 Two Axis Automatic Flight Guidance System; OR, FAA Approved Supplemental Flight Manual P/N 89125-1 dated 7/30/82 is required for Mooney Models M20F and M20G with S-TBC System 60 Two Axis Automatic Flight Guidance System with Optional Autotrim System (Using Roll Servo P/N 0105- 1-R2)

2. Compatibility of this modification with other previously approved modifications must be determined by the installer.

FAA FORM 8110-2-1 (1O-69) PAGE2 OF 2 PAGES

TRANSFER ENDORSEMENT Transfer the ownership of Supplemental Type Certificate Number to (Name of transferee) (Address of transferee) (Number and street) (City, State, and <7P code) from (Name of grantor) (Print or type) (Address of grantor) (Number and street) (City, Slate, and <7P code) Extent of Authority (if licensing agreement):

Signature of grantor (In ink):